Announcement

Collapse
No announcement yet.

EO

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: EO

    Might be GSO.
    Cottonseed it clear almost with a light yellow almost tan color.
    BLACK LION RESEARCH

    Comment


    • #17
      Re: EO

      Blends of High MG or mixed blends of 2-3 different esters will be painful on their own. EO like said above shouldn't cause the pain. Cutting yours down to 250mg will be the trick. All the Test Prop I make is with 50% EO and it helps thin it out and is not so painful. Also I cut back the BA just a tad to help as well. BA will actually cause more pain. I also use Saflower Oil for all my gear. Never been a an issue and it's super smooth and very clean/clear looking. Make sure you filter with a .2 micron filter
      Always expect the unexpected!


      young_hulk@hushmail.com

      Comment


      • #18
        Re: EO

        I used .5 sterile GSO and .5 T500 so far so good as far as PIP

        Comment


        • #19
          Re: EO

          Any thoughts on the safety of EO health wise? I read it isn't approved as an injectable in the US.

          Comment


          • #20
            Re: EO

            I only use gear with EO if I have the choice.
            Squats make the world go round.

            Comment


            • #21
              Re: EO

              I am at a cross road now what to do. OK the T 500 I have is 250 t c and 250 t e per ml, made in GSO and 10% EO. Should I contact the maker and tell him about the PIP or should I just grin and bear it?
              The PIP is a hard place at site of injection followed by muscle tightness and stiffness with pain at movement. It does not prevent me from working out it is uncomfortable.

              Comment


              • #22
                Re: EO

                t500 should leave a knot in your leg after injection. The pain is just a function of taking so much per injection. if you are unsure of the carrier dilute it with an oil, and I'm sure your pain after injection will go away. 250mg 3 times a week is a nice dose.

                Comment


                • #23
                  Re: EO

                  Originally posted by dirtwarrior View Post
                  I used .5 sterile GSO and .5 T500 so far so good as far as PIP
                  Perfect
                  BLACK LION RESEARCH

                  Comment


                  • #24
                    Re: EO

                    Originally posted by dirtwarrior View Post
                    I am at a cross road now what to do. OK the T 500 I have is 250 t c and 250 t e per ml, made in GSO and 10% EO. Should I contact the maker and tell him about the PIP or should I just grin and bear it?
                    The PIP is a hard place at site of injection followed by muscle tightness and stiffness with pain at movement. It does not prevent me from working out it is uncomfortable.
                    Bro....ANY t500 is gonna be painful lol.......Gear made at this mg/ml is worthless.
                    Trust me. INtead shoot 2ml of a nice clean 250mg gear and youll have no issues. Personally I prefer 200mg cyp. you can shoot 3ml with no PIP
                    BLACK LION RESEARCH

                    Comment


                    • #25
                      Re: EO

                      Originally posted by BigDaddyBill View Post
                      t500 should leave a knot in your leg after injection. The pain is just a function of taking so much per injection. if you are unsure of the carrier dilute it with an oil, and I'm sure your pain after injection will go away. 250mg 3 times a week is a nice dose.
                      The pain is from all the solvents and the test crashing in your leg after injection.
                      If the gear was 200mg you could shoot as much as the muscle could handle with no issues.
                      BLACK LION RESEARCH

                      Comment


                      • #26
                        Re: EO

                        Originally posted by BRUNDEL View Post
                        The pain is from all the solvents and the test crashing in your leg after injection.
                        If the gear was 200mg you could shoot as much as the muscle could handle with no issues.
                        I contacted the maker and he told me the very same thing. I am humbled by the knowledge you guys have and are willing to help out others.

                        Comment

                        Working...
                        X