Slin pins for Fina?

[Juice Authority]

Due the frequency of the injections I've been considering using slin pins for Fina injections. Personally I've never used a slin needle to inject any type of AS. I like to get it deep down in the muscle so I use an inch point and pop it right in the quad or the shoulder. Anyone here try this with Fina?

Thanks,

Juice

[##spiderbaby##]

Its all I use. Works like a charm, you will never go back. Also, scar tissue is almost non existent.

[CJWolf]

i've used up to 29g needles with fina wiht no problems ...

[johnnyboy845]

ok have a bunch of slin pins from my L-carnitine days and I use a 5/8 25g pin now for delts and triceps.... do you draw from the vial with the slin pin then shoot... my slin pins dont have a removable needle... or do you use another pin and take the plunger out of the slin pin to fill it then shoot... just wondering being I have them

[johnnyboy845]

and my slin pins are 1/2" is that long enough???

[CJWolf]

i draw up with the same needle i shoot with .. the smaller needles dull less easily than a larger one ...

mine are 29x1/2" and i've used them without a problem ..

[##spiderbaby##]

I always took the plunger out although for slin I am just using the needle. I thought I would notice a difference with the needle technicaly being used once but I havnt noticed and difference.

[Juice Authority]

Originally posted by johnnyboy845
ok have a bunch of slin pins from my L-carnitine days and I use a 5/8 25g pin now for delts and triceps.... do you draw from the vial with the slin pin then shoot... my slin pins dont have a removable needle... or do you use another pin and take the plunger out of the slin pin to fill it then shoot... just wondering being I have them

I would think drawing from the vial with 5/8 25g needle would take forever.

[johnnyboy845]

the pins I presently use are interchangable tip... I use an 18g to draw now... but was wondering what to do with the 100 slin pins I have.. will be running HGH soon so I will use them... L-Carnitine was the biggest waste of money for me LOL never thought it might take forever to draw it up with the slin pin... good point

[OvEr JUicEd]

Im fixing to start a tren/prop cycle and wanted to know if I could do both in the same slin pin ?

[Doom]

Tren will def go through, the prop might as well, heat them under hot faucet water for a few minutes, that should get things moving

But with the pin only being 1/2" unless you are quite lean, I wouldn't pump more than a cc into an area at a time,

Originally posted by OvEr JUicEd
Im fixing to start a tren/prop cycle and wanted to know if I could do both in the same slin pin ?

[x|Fluid|x]

Doom,

I'm around 8%bf right now, do you think I could get away with using a 1/2" slin pin for quads?

[CJWolf]

i would use 1" for quads just ot get it deep into the muscle ..

[jack hust]

ill have to try it i use 25 ga now