B12 before or after oil

[MidnightRider]

When combining B12 and oil based gear in the same dart, which do you load first? I've always loaded th B12 first. It works fine. Anyone load the oil first and then B12?

[Canuck4]

It wont make a difference bro.

[jipped genes]

i do b12 second because i draw with a dif pin than i shoot with and it gets that last little bit of precious gear in the barrel.

[AceDaBoss]

Shouldn't matter. I have actually sandwiched the gear in between. So virtually zero is wasted.

[Drenten]

Originally posted by AceDaBoss
Shouldn't matter. I have actually sandwiched the gear in between. So virtually zero is wasted.

How did you manage that?

Anytime that I have ever mixed oil-based and water-based stuff in the same syringe, the water based stuff always comes out first no matter what.

[MidnightRider]

Originally posted by Drenten
How did you manage that?

Anytime that I have ever mixed oil-based and water-based stuff in the same syringe, the water based stuff always comes out first no matter what.

It depends on the angle of the dart. When I hold it horizontal, whatever I loaded last comes out first. If I hold it vertical the water base starts to sink to the bottom. Not that it makes a difference.

[fireman]

believe it or not some oils will seperate to the bottom of b12. I have some 400mg/ml prop that does this. I mix 1cc of suspension/tren 1cc of b12 and 1/4cc of prop the b12 stays in the middle of the barrell with the prop by the plunger and the suspension by the pin. I think it's just the solvents used to get 400mg of prop in a ml of oil. I just shake the hell out of it and use the airlock method just to not waste my prop.

[AceDaBoss]

Kinda weird looking when you shake it isn't it? Red blobs floating in the oil.

[twat]

how do you sterilize the b12?

[buyb12]

I do the b12 first I have some test floating around in my b12.....ha ha

[jack hust]

it really does not matter