A old plug in outlet in the wall

[FUZO]

TweetOk I have had this old outlet in the wall that needed replacing well I took the old one out just for my benefit I copied what wires went were just incase I forgot. So I went and bought a new one and put it back in and god damnit the lite switch doest turn the light on anymore you have to go to the lite to turn it on.

You have your hot side then you have your neutral side-white. well the one red wire went to one side of the hot side screw then the orange wire went to the other side screw. then the white wire went back to the other side of the 1 screw and I hooked it all back up and the wall switch wont turn it on. I have the wires in the same place as the old one.talk about weird


heres a pic. ok as you can see theres supposed to be 2 screws. so one side there is one white wire wrapped around 1 screw. then go to the other side and thers one red wire wrapped around 1 screw the the other orange wire is wrapped around the othern screw. one side is gold one side is silver. one side is hot one side is nuetral .I know wtf i'm doing this has me baffled. No other wires loose or in the wall loose

[daved150]

Tweethuh...got me bro...i dont get it? wtf???

[deepsouth]

TweetIf you give me a day or two- I work with an Elect.- he will set you straight

[horsepwr]

Tweet

You have your hot side then you have your neutral side-white. well the one red wire went to one side of the hot side screw then the orange wire went to the other side screw. then the white wire went back to the other side of the 1 screw and I hooked it all back up and the wall switch wont turn it on. I have the wires in the same place as the old one.talk about weird

Are you saying you hooked the red(hot) and the white(neutral) on the same screw?..and the orange(switch) is on the other screw by itself?

[horsepwr]

TweetAnd if you leave the light turned on, the switch won't turn it off & on?

[FUZO]

Tweet

Are you saying you hooked the red(hot) and the white(neutral) on the same screw?..and the orange(switch) is on the other screw by itself?

NO HORSEPOWER. ONESIDE 2 SCREWS. ONE SCREW GETS THE RED ONE SCREW GETS THE ORNANGE. THEN ON THE OTHER SIDE ONE SCREW GETS THE WHITE

[horsepwr]

Tweet

NO HORSEPOWER. ONESIDE 2 SCREWS. ONE SCREW GETS THE RED ONE SCREW GETS THE ORNANGE. THEN ON THE OTHER SIDE ONE SCREW GETS THE WHITE

I don't know. 3 wires. You wired it the same as before.
Do you have a circuit tester?

[electricmuscle]

Tweethey bro i am an electrician.... most like likley the side with the two wires is the hot side with the orange and red wires. there is a tab that connects the two screws if the switch is supposed to operate part of that outlet then that tab needs to be broken just take needle nose pliers or and bend it back and forth or a small screwdriver.

[FUZO]

TweetSee when I rush things thats what I forgot to do break away the tab.It works now

[Doink the clown]

Tweet^^^Good thing this got resolved!!!!, it's always the simple things we miss in a hurry....reps to Electric muscle every one!!!

[deepsouth]

Tweetman- thank God you didn't burn down the house- LOL

[bowbow]

TweetLooking at that old outlet he is real lucky the house didn't burn down.

[electricmuscle]

Tweetif u get any other probs feel free to message me.... i have lots and lots of troublshooting experience.. been doing it for 17 years now

[FUZO]

Tweet

Looking at that old outlet he is real lucky the house didn't burn down.

BOWBOW THATS N OT MY OUTLET THATS JUST A OUTLET I FOUND ON THE INTERNET TO SHOW A EXAMPLE OF,LOL

[IronpumpedLady]

TweetWell, I know who I won't ask for electrical advise on my remodeling projects I have going on! LOL

I' think I get a direct line hook up to electricmuscle!! LOL


Stay Strong~~!!!
IPL