another BA content / oil type question

[mike1107]

Tweetas you know , my trenb batch hurts like hell and I'm almost sure it comes from BA .
I stay swollen 2-3 days post shot in the site injection, no redness or something , just swollen .
I have the option of adding some sterile water in it, but if I only add sesame oil in it ( filtered of course ) ? it will lower the general concentration which is not a problem , but it'll also lower the BA content ... how much should I add in a 50 ml vial with 100 mg/ml ?

another question : I didn't do this trenb by myselfand don't know exactly if the guy who did it used sterile, sesame oil ...
can I mix it with sesame oil anyway ? (it's this oil that I use to do my own products)

need your help bros, it pisses me off to look like ronnie coleman everywhere I inject LOL

[thehamme]

TweetMy tren hurts like hell too, cutting even seems to not help.

[iced]

Tweettry adding 12.5 mls of oil, should bring it down to 75 mg/ml

[spidey]

Tweet

Originally posted by mike1107
as you know , my trenb batch hurts like hell and I'm almost sure it comes from BA .
I stay swollen 2-3 days post shot in the site injection, no redness or something , just swollen .
I have the option of adding some sterile water in it, but if I only add sesame <a href="https://www.researchkits.com/" target="_blank">oil</a> in it ( filtered of course ) ? it will lower the general concentration which is not a problem , but it'll also lower the BA content ... how much should I add in a 50 ml vial with 100 mg/ml ?

another question : I didn't do this trenb by myselfand don't know exactly if the guy who did it used sterile, sesame <a href="https://www.researchkits.com/" target="_blank">oil</a> ...
can I mix it with sesame <a href="https://www.researchkits.com/" target="_blank">oil</a> anyway ? (it's this <a href="https://www.researchkits.com/" target="_blank">oil</a> that I use to do my own products)

need your help bros, it pisses me off to look like ronnie coleman everywhere I inject LOL

It doesn't matter if he used sterile oil. As long as he sterile filtered it afterward, it is OK.

On an unrelated issue, notice how "oil" is underlined in everyone's posts? I think that is due to some glitch with the system itself. I know I didn't intentionally underline anything. Also, there is all kinds of extra characters in the quote that aren't in the original post. Weird.

-Spidey

[Chemical Evolution]

TweetThe Ba content will sterialize the oil. so thats not it you could try the water trick to reduse the ba levels. Personally id get a hold of the guy who made it, and then take it from there!

[voodoochild]

TweetIf possible I would get a hold of the guy that made it and try to use the same oil he did. Probably not a big deal but why take a chance the two oils won't blend properly if you don't have to. Also, just me but I would probably double the oil and cut the concentration to 50mg/ml...but I am a pretty big *****.

[iggy]

TweetHave you tried heating it yet?

[mike1107]

Tweet

Originally posted by iggy
Have you tried heating it yet?

I'll do that