Tweettake out some of the oil 5-8cc out with a pin
Tweetaight fellas i have crushed up my 2 cartridges of pellets and put them in the "magic solution" after it totally disolves, what exactly do i do? Mix it in the other full container of the clear oil right. But that container is already full to the top, so what do i do?
Tweettake out some of the oil 5-8cc out with a pin
Tweetits not really gonna effect the concentration, and is all of that going to fit in the vial they gave me? I did receive the 4g kit from kits.com
TweetOnce the pellets are disolved, remove 5cc from the oil bottle and add the oil to the pellet solution. Warm and swirl the contents, run through coffee filter. Warm again and run through the whatman, purge the whatman with the extra oil (5CC's ) you removed.
Owner@www.anabolicfreakz.com
Disclaimer:
Ken is presenting fictitious opinions and does in no way, shape or form neither encourages, use nor condone the use of any illegal substances or the use of legal substances in an illegal conduct. The information discussed here is presented in a fictitious method, and is for educational purposes and role playing only.
Tweeti take it you mean purge as in use the extra oil to get the remaining gear out of the whatman, does it hold a couple cc's or somethin
how exactly do you run through coffee filter, and you said purge with extra 5 cc's i removed, but i thought i was to put that in the pellet solution, do i remove a total of 10cc of oil or what? thanks for the help!