Lewd's homemade synthol recipe

[WSURAIDER]

TweetI know you posted this on FB back in the day, you still have it around? Thanks!

[BIG-G]

Tweeti can paste and copy it for ya..........

[BIG-G]

TweetDirections For Making Synthol


WARNING: This is not intended for injection. This is a very dangerous pratice.This is a posing oil.


I suggest you get the following:

1)a few STERILIZED 150ml vials
2)5ml BA for every 100ml of oil
3)1000ml MCT oil
4)a ton of alcohol pads
5)box of syringe/pins(23g/3cc)-don't use slin and get at least 1-inchers
6)box of pins(23g)
7)filters( should be able to do more than 100ml of oil since it has no AS suspended in it)
8)large syringes for filtering. I use 60ml.

DIRECTIONS
1)attach drawing pin to 60ml syringe.
2)draw 3ml of BA into the large 60ml syringe
use 1ml of Ba for every 20ml of MCT oil
3)Now draw some MCT oil to fill the syringe.
4)hold the syringe with the needle pointing upward and remove the drawing pin
5)attach a .45 or .22 filter to the syringe
6)attach a fresh drawing pin to the filter
7)wipe the top of the sterile 150ml vial with a new alcohol pad.
8)place a pin size 23g or smaller into the rubber membrane of the vial to relive air pressure
9)insert the needle attached to the filter and syringe into the sterile vial.
10)Press slowly on the syringe with only enough pressure to push the oil through and not more than that.More pressure does not help.
11)remove the filter from the pin attached to it and leaving the pin in the sterile vial.
12)attach the drawing pin used to draw oil and draw more oil and BA using 1ml of BA per 20ml of MCT oil
13)remove drawing pin and attach the filter to the drawing pin left in the sterile vial
14)repeat steps 10-12 until the vial is full.
15)when the vial is full remove both pins from the vial and wipe the top with a fresh alcohol pad

Never touch the top of the sterile vial with your hands and never touch the drawing pins with your hands. We are trying to keep this sterile.

when drawing from the vial always wipe it with a fresh alcohol pad and use a fresh drawing pin.wipe the vial before and after injecting a pin into the vial always with a fresh alcohol pad

[prolangtum]

TweetMost synthol have a different fat than MCT oil, that stays around longer in the muscle.

[BIG-G]

Tweetthe body will break down any fatty acid put into it so it makes no difference

[WSURAIDER]

Tweetthanks a ton big g. Another ? for you, I have never made my own gear, so I have no real ideas about prices on any of those things besides pins. How much would I be saving going this way? Thanks again bro.

[droid]

Tweet

Originally posted by WSURAIDER
thanks a ton big g. Another ? for you, I have never made my own gear, so I have no real ideas about prices on any of those things besides pins. How much would I be saving going this way? Thanks again bro.

Well your not making gear, synthol is just oil with no steroids I hope you know that?(LOL) The components list would not run more than $100? Considering Synthol is at best $100 per 100ml and this recipe makes 1000ml for $100 it's alot.


DROID