So I mixed Prop powder with BA and it didn't dissolv, so I added some more BA as I didn't have any BB or PG. I heated it up and it finaly dissolved. Then I mixed in oil. Then It crashed..
Crystals were formed even though I had been using about 7% BA. I then decided to use PG(propylene glycol) as I already had that and could get BB.

My mix: 10g Prop powder, 7%BA and 15% Propylene Glycol. and oil of course. All heated and dissolved and then added the Propylene Glycol. The mix was cloudy from the beginning when I mixed the powder with the BA, probably because of the air(I thought..)

I let the hole mix sit over night and when I woke up the bottle had 2 layers. One clear at the bottom and one not that clear with oil at the top.

I cant get them to mix up without the layers separating, so what should I do??

If I filter it I'm affraid the only thing that will go thru the filter will be the clear thing that is on the bottom, probably the PG and not the dissolved proppowder and oil. Can anyone help me here..?