Printable View
I recently received an order from a trusted supplier. One problem, it hurts like hell at site of injection next day for several thereafter. He recommending cutting it with grape seed oil. One ML per one ML of already mixed solution. How do I do so safely? Just buy at grocery store and inject as is or boil it first or is there another way I prepare or step(s) to take before I add it to my bottle?
No idea but I will bump for information for you!
I've had that identical issue when I was pinning tren ace. I used gso at 1/2 mil per mil of ace and the problem was solved. It came in a 30 ml vial. I don't know if I should post the company name here. Don't want to step on the rules or anything. I think most health stores sell gso. Cheap too....
I would draw compound to desired quantity, remove from vial and create an air gap for amount of gso. Plunge just short of forcing compound in vial and pull back desired amount of gso. Remove pin, force out remaining air gap out of needle, prep and jab.
Others might have a better method, but this worked for me. You'll get the gist of it after one or two attempts
So then just use GSO as is - straight out of bottle? No preparation or sterilization necessary?
What I had was in a sealed vial. Im only sure if you buy gso off the shelf, you will have to sterilize it with a whatman filter prior to using. Just to be on the safe side
Somebody with a little more experience will chime in soon....
Maybe google "sterile gso" might help
Googled it as suggested and found source and ordered, sterile and in 30 lm vial of GSO. It's enroute! Thank you ODB and everyone else for the 411. I'll let you know how it works as a cutting agent. I'm going to go with a 1 ML to 1 ML ratio to cut. Stay tuned, I'll report back soon . . . Lex
WHAT IS IT YOU ARE CUTTING? IF YOU ADD A COUPLE OF MLS TO YOUR BOTTLE, THAT SHOULD DO IT. 1 ML TO 1 ML OF PRODUCT IS CUTTING YOUR MGS. IN HALF.
DO YOUR MATH AND THAT WAY YOU KNOW THE MG OF WHAT YOU WILL BE INJECTING.
AS LONG AS ITS 100% PURE GSO, YOU WILL BE FINE. THE PRODUCT HURTS BECAUSE THERE IS TOO MUCH BENZYL ALCOHOL IN IT. THE RECIPIE WAS OFF.
THE BA (BENZYL ALCOHOL) IN IT WILL KEEP IT STERILE...
Spot on.....That method is even better.Quote:
Originally Posted by O2BESOHUGE
good luck with it man!
o2
I'm cutting 5 different drugs from same supplier. All of which are dosed very high: tri-blend (300 mg - 100 prop, 100 masteron-a & 100 tren-a), sust 500 mg, deca 400 mg, cyp 400 mg & prop 200 mg.. Never had a problem with any of these from this supplier till last 2 batches and yes it is the benz alcohol which is the issue. He's recommending cutting each ml with 1 ml of GSO. Which I'll try. But he's also been kind enough to totally replace the bottles that are bad so I'll be experimenting on myself with the GSO cut! Now that's a stand up guy. He's always pushed the limit of max. dosage and never a complaint prior to about a month ago so he gets a mulligan in my book! Thank you to everyone for the replies! Lex