Juice coming out of Site

[teutonic]

TweetLast night I injected 1/2cc EQL tren/prop with oil into my right glute. When my girl pulled out the needle the juice started coming out. There was no blood just the juice. Why did this happen??

[prolangtum]

TweetWho knows, happens to me all the time on delts. Try the airlock method. Do a search on it.

[teutonic]

Tweetdid a search and what I can gather I should push a little air into injection spot before the juice goes in. Dont know if this is correct though.

Also towards the end of the injection I started to feel pain. It was weird. It was like I felt the juice in me and it was causing pressure. Like it was building up. It was like when you fill a glass of water and you overfill it and the water just spills out of the glass. Thats what it kind of seemed like.

[teutonic]

TweetShe injects really slow. Probably no big deal just hate to see the juice your pushing in is pushing itself back out. Just sucks!

[fighter0728]

TweetI have never had this problem but I have heard of a way to inject with no leakage. It is simple but I think it will be hard to describe. You want to push down on the skin next to where you are injecting, and hold it down while you inject. This way when you pull the needle out and let go of the skin the path of the needle wont be straight up and down, it will be diagnol. This will prevent juice from getting out. I saw a really good chart on it, pictures describe it so much better than I can. Hope this helps

By the way are u sure it juice squirting out and not just juice from lubricating the needle. If a lot of juice come out while I am getting rid of air bubles it will run off the pin and dow where I am injecting while I inject.

[Got Gear?]

TweetHad my first leaky injection just this morning.


Here's what I've found helps.

1) Once all the juice is injected, leave the pin in for a few seconds before taking it out of your muscle.

2) Have a piece of gauze handy. Put immediate pressure on injection site, hold for 30sec.

If you do both of those things, you shouldn't leak more than a drop or 2.

[teutonic]

TweetThanks for the help bro's.

fighter0728 I'm positive it was juice.

Got Gear? I should just put pressure and not massage area?? I can use an alcohol pad instead of gauze right??

[Lmg2701]

TweetFirst, it won't be enough to matter. Second have you been going to this spot a lot lately, possibly scar tissue. Third you can try the z-method as i believe it is called. What you do is push in a slight bit and then push the syringe a little to one side and finish the injection. I've heard of people using it, I tried it once and didn't think it worked that great but it's worth a shot. If all else fails just be waiting with a cotton swab right after you pull out the needle and start massaging.

[Got Gear?]

Tweet

Originally posted by teutonic
Thanks for the help bro's.

Got Gear? I should just put pressure and not massage area?? I can use an alcohol pad instead of gauze right??

Massage the area after....Stop the leaking first.

I use an alcohol pad also. Whatever works, alcohol pads sting a tiny bit.

Lmg2701: I'll bet I lost 1/2cc of gear today. Enough to matter to me. The Z-track method does work well, but I've found it's more trouble that it's worth. Putting pressure on the injection site with a gauze pad is easier and seems to work well for me. Only have to hold it on for 30 seconds or so, then start massageing.

[G*B]

TweetYup this happend to me last week in my delt. I did another one a few days later, but this time let the pin in there for about 15secs. Then I quickly a alcohol pad and pressed on the site for 15-30 secs and massaged it. And after all this no blood and no juice came out.

[teutonic]

TweetGot Gear? I'm with you. I'm only doing 1/2cc with 1/2cc of oil and I'd say I lost about 1/2 of it. It came streaming out of the injection. It wasn't like it was just a little drip coming out.

[Ttokkyo--Dog]

Tweetyeah i rotate every time i inject and small amount comes out, nothing that i am not used to !