TweetMyself I like tesd d in the 500 mb/ml. 1 pin a week and all is good

TweetTest 300 is the minimum mg for a long ester for me but I prefer t400 just for the extra room in the barrel when I'm running multiple aas, otherwise I end up with to many ml in mine injection so for me higher mg test gets me the mg I'm looking for with less volume

TweetPersonally I like high mg chemicals , have always prefered it that way , since day one !!!
Go big or go home !!!
But I'll use either high or low mg compounds !!! All the crying about pip from some people is funny because some want the advantages of high mg compounds just don't want the aftermath of the chemical, but that's only I certain cases.
Not all chemicals that come in high mg form have PIP .

TweetI have used 500 mg/ml no pip

TweetHave to think about the consequences. If you can run 500mg with no pip go for it. If your pip is so bad it impairs your workout it's rather a waste. I stick with either 250-300 mg cyp with 3 pins per week or hit sust 3x week. If you're running one esther at 500 and only pinning once a week have to consider the time it will take between the new dose kicking in the bloodstream and the level dropping off from the first. Might not be huge deal all considered but I'm fussy about test levels being fairly constant and consistent. Just my $0.02


Sent from my iPhone using Tapatalk

Tweet300mg per ml is more than enough and no pip at all. i find it hard to believe when i see people claiming little to no pip from 400 and above considering the solvents and stuff needed to suspend compounds at that level. so going with 300g ed is more than high enough for me and i have no issues with pain. i would be willing to bet that some of the 4-500 or even 600 total mg compounds we see arent quite what they are supposed to be or at least that's what i have heard from some top and really seasoned brewers. my prime example to that point is a current research paper on test d at 500mg. the hrt community is shying away from this compound due to the amount of pain and reaction that patients are getting from it. that is a pharm grade compound and it is supposed to be damn near crippling

Tweet

Originally Posted by guns01

300mg per ml is more than enough and no pip at all. i find it hard to believe when i see people claiming little to no pip from 400 and above considering the solvents and stuff needed to suspend compounds at that level. so going with 300g ed is more than high enough for me and i have no issues with pain. i would be willing to bet that some of the 4-500 or even 600 total mg compounds we see arent quite what they are supposed to be or at least that's what i have heard from some top and really seasoned brewers. my prime example to that point is a current research paper on test d at 500mg. the hrt community is shying away from this compound due to the amount of pain and reaction that patients are getting from it. that is a pharm grade compound and it is supposed to be damn near crippling

Ouch indeed


Sent from my iPhone using Tapatalk

TweetIVE MADE TEST E 400 FOR YEARS WITH LITTLE TO NO PAIN...JUST DEPENDS ON WHO COOKS IT AND HOW

TweetI've gotten many different testosterones over the years. Some 300..some 500...but I just have to say its all in the quality.
I've done test 500that damn near killed me with pain...and others that had very little pain. It really is all on where you get it from...needle size...etc.
Good luck!

TweetI would go higher milligram simply for the lower amount of oil in the pin for other compounds.

TweetTHE HIGHER THE MGS, YOU NEED TO SPLIT THE OIL IN THE RECIPIE 50/50 AND DO HALF ETHYL OLEATE.
THAT WILL MAKE IT SMOOTH AS BUTTER!

TweetI like the higher mg stuff myself because when I recently tried to run a long ester and short ester test, tren, deca, primo e and a it came out to like 18ccs per week to try and get the doses I wanted and I gave up on the everyday hits and probably only hit maybe ten cc per week. since then I decided to scale back on quantity of items and just go big with two or three of them.

Tweeti like 300 mg per ml of test cyp. i don't have to worry about it crashing and no pip, though pip is not that big of deal.